Natural Grey - 14mm Engineered Oak Timber Flooring
Not sure what the differences are? Start the guided process here.
Our 14mm European oak flooring consists of a veneer of a 2mm veneer of solid European Oak timber bonded to a 7 layer cross-bonded core.
This form of board construction delivers high performance structural integrity and longevity. European Oak contains very consistent and elegant natural grains and features, delivering a minimal contemporary aesthetic from a natural material.
Superior board stability allows for installation directly to an acoustic underlay or concrete slab by way of a floating (click-together approach) or via direct adhesive.
The gorgeous timber is sourced from the finest plantations in Europe and France here only the highest quality timber with minimal defects and blemishes are hand-picked. It is finished with 7 coats of Teknos Lacquer of Finland for exceptional durability.
-
Construction - 3 layer construction for exceptional stability:
- Top: 2mm European Oak (Quercus Robur)
- Core: 6 Layer Cross-Bonded Eucalyptus
- Backing: Birch
- Gloss Level: Ultra Matte (5 - 8%)
- Lacquer Coats: 7 Coats Teknos Lacquer (Finland)
- Profile: Micro-Bevelled Edge
- Locking System: 5G Välinge (Licensed)
- Installation: Floating via click-method or direct stick
- Janka: 7.0
- Nested Boards: 25%
- Grading: ABCD
Benefits of our Grey 14mm Oak Flooring
- Can be installed quickly with a fast-fitting 5G click system as a floating install or trowel glued down install.
- Suitable over underfloor heating.
- New Hush-Step silencing technology that keeps the locking systems quieter and less creaky when stepped on, especially when installed as a floating floor.
The boards are 190mm wide and 1900 long, with less than 25% nested planks. It can be installed either as a click based floating system, with a raft size of 8 x 12m or direct stuck down with a raft size of 10m x 20m before expansion gaps.
Colour and grading may vary from batch to batch. Being a natural product, colour and grain will vary, whilst knots and surface checking are to be expected. All images used are for colour reference only and small samples are not always representative of the overall installed effect. If any boxes do not meet expectations, pause the project, do not open more boxes and contact us for support.
The product must be installed to Australian Standards or ATFA guidelines for floating engineered timber floors or direct-stick glue down installs.